Telescopic magnetic separator MSV 150/5 VVM-P-1-80-TP-RP-D

The video below serves only to illustrate the principle of the function and may not correspond to the execution, design, number of grates and tubes of this particular item on the e-shop you are currently on.

Magnetic separator, telescopic type, is designed for a separation of ferromagnetic impurities from dry mixtures characterized by good loose parameters.
The device includes 5 pipes (2 pipes located on the upper floor, 3 pipes situated on the lower floor).
Neodymium magnets are used.
Magnetic separator (magnetic filter) is manufactured using DIN 1.4301 stainless steel.
Magnetic induction is on the level No. 1 (core magnetic induction: 10400 G, core tear-off force: 133 N, coat magnetic induction: 7400 G, coat tear-off force: 100 N).
Maximum working temperature of this separator is 80°C.
The body, grates and pipes of the magnetic separator are surface-treated by sanding.
The door is manufactured using plexi-glass with the thickness of 8mm.
The sealing that is a part of the separator is suitable for the food manufacturing industry.
Magnetic core weight is 7.2 kg; total weight is 14 kg.

The reported tear force values for some products were measured under ideal conditions given by the test environment. However, these values may vary depending on the specific type of environment where, for example, operating conditions and subsequent wear may affect the effectiveness of the product. However, measurements have not been made for all products and in such cases are only an estimate or internal auxiliary calculation by the vendor. The values quoted are therefore to be considered as indicative and the Seller declares that they are not a description of the goods in terms of the agreed characteristics in the sales contract on the basis of Article 6(a) of Directive (EU) 2019/771 of the European Parliament and of the Council of 20 May 2019 on certain aspects of contracts for the sale of goods, amending Regulation (EU) 2017/2394 and Directive 2009/22/EC and repealing Directive 1999/44/EC. In order to determine the exact value of the tear force in a specific case, it is necessary to carry out the actual measurement. In case the detected values of the breakaway force are not sufficient for you, as they do not correspond to the stated values, you can take advantage of the guaranteed return option within 30 days under the conditions stated here: https://magsy.shop/goods-returning/ and purchase a stronger magnet. These 30 days are just for testing the goods, after which the seller can refuse the return.