We ship within 24 hours
We ship goods within 24 hours on business days.
9,000,000 pcs IN STOCK
We have more than 9,000,000 items in stock.
23 years on the market
We are a Czech company with 23 years of experience on the market.
Thousands of satisfied customers.
Thousands of packages shipped and satisfied customers.
DESIGN
Instructions for use:
Can be applied directly from the tube with a fine dispensing glue tip. Make sure the surfaces to be glued are clean, dry, dust-free and degreased. Apply the adhesive to one side of the parts to be bonded. Press the two parts together. Correction is possible for 5 minutes. Maximum strength is achieved after approximately 24 hours.
Spots/Residue: Remove adhesive residue immediately with acetone. Test beforehand in an unseen area.
Tips: Loosen the tightly adhered protective cap under hot water and remove the dried adhesive residue in the tube cap with a sharp knife. Before screwing the cap back onto the tube, allow some glue to flow out of the tube after use.
DRYING TIME*
Manipulation Strength: approximately 15 minutes
Drying/Curing Time: approx. 4-24 hours This figure may vary depending on environmental conditions such as temperature and humidity.
* Drying time may vary depending on, among other things, substrate, amount of product applied, moisture content and ambient temperature.
Product Description
This adhesive is an innovative all-purpose adhesive for 1001 repairs inside and out. The adhesive is extra strong, highly elastic, waterproof and fills joints.
SUMMARY OF USES
Extra strong adhesive suitable for repairing porous and smooth materials such as wood, textiles, leather, cork, metals, glass, plastics, rubber, ceramic tiles, stone, cement and many other materials. Suitable for use
indoors and outdoors. The adhesive is based on polymer technology. Products based on this technology guarantee a versatile, strong, flexible, long-lasting, safe and user-friendly everyday solution. Not suitable for Polypropylene (PP), Polyethylene (PE) and P.T.F.E.
Features
■ Extremely strong
.
■ Extremely flexible
■Waterproof
■
Joint Filler■Dishwasher safe
■Resistant to shock and vibration
■
Heat resistant■
Resistant to UV rays
■
Solvent-free
■
Transparent
TECHNICAL FEATURES
Moisture resistance: very good Water resistance: very good
Temperature resistance: -40 °C - +120 °C
UV-resistance: good
Chemical resistance: good
Resistance: good
Elasticity: very good
Joint filling ability: very good
Technical Specifications
Base: SMP Polymer
Adhesive technique: single-sided adhesive application
Color: transparent
Consistency: pasty
Viscosity: approx. paste
Solids content: approx. 100%
Density: approx. 1.1 g/cm3
Shrinkage: approx. 0%
STORAGE CONDITIONS
Minimum 24 months from date of manufacture Once opened, the product has a limited shelf life. Store in a closed container in a cool, dry place. Protect from frost.
Note: The above information is the result of careful research. To the best of our knowledge, this information is intended to advise on bonding. We cannot accept any responsibility for the results and any damage in a particular case, given that with the extensive possibilities (material types, material combinations and working method) we cannot influence the interacting factors. It is necessary to carry out your own tests and experiments. We can only guarantee the consistently high quality of this product.
Additional parameters
| Category: | Magnetic aids |
|---|---|
| EAN: | 8595133920643 |
| Hmotnost (g): | 330 |
| Popis: | tuba 20g |
Be the first who will post an article to this item!
Add a comment